HSM 390.3cc Level 3 Cross Cut Professional Paper Shredder Review

HSM 390.3cc Level 3 Cross Cut Professional Paper Shredder Review

Any office floor or large department can benefit from a central shared shredder to handle everyone’s needs. One ideal system for this is the HSM 390.3cc Level 3 Cross Cut Professional Paper Shredder. This workhorse is built to efficiently accommodate heavy duty use in large businesses with 15-20 or more users. Here is a closer look at the details of the 390.3cc.

Strengths:

Automated use provides extremely easy operation. A single switch controls on, off, and reverse functions. Once on, the engine sits in an energy conserving standby mode. The electronic controller uses a photoelectric cell to start and stop the blades as needed when items are inserted into the paper entry. Jams are quickly cleared as the automatic reverse kicks in to release the overfed paper. All automated modes are displayed on an LED panel for constant awareness.
A robust, continuous duty motor drives the machine, aided by a closed gear transmission. The time-tested system keeps dirt out and thermally protects the motor from overheating. As a result, wear is delayed and the service life is extended.
Up to 22 sheets of stapled or paperclipped pages can enter the wide 15.8 inch feed at once. The blades are even strong enough to handle credit cards, CDs, and DVDs. All materials are shred as fast as 27 feet per minute.
The cross cutting mechanism rapidly dices up full size documents into tiny pieces. These small particles measure 1/8″ by 1-1/2″ in size and provide a level three security rating. This is perfect for general office shredding as well as most confidential items, including bank statements, employee information, and personal data.
Those minute bits fall into a large 31 gallon waste bin. The container is lined with a reusable shred bag that has a pull-out system for easy emptying. When the bag is full or the cabinet door is open, an automatic safety shut off cuts power to the engine to avoid accidental injury.
This product is covered by a two year warranty on parts and labor. The blades carry an impressive 20 year warranty.

Weaknesses:

This machine weighs about 123 pounds when empty. It would be heavy to move if it weren’t for the casters on the bottom. Since it can be rolled around from one location to another, we think most users won’t find this to be much of a problem.
While level three security is great for most office shredding, it still only offers a medium safety level. Businesses with highly classified or top secret documents to destroy will need a high security shredder, such as the 225.2 in a level five or six rating.
A multimedia shredder is extremely convenient but makes recycling difficult without offering separate waste compartments. If recycling is important to you, we suggest using a separate multimedia shredder or looking into a device offering differentiated waste.

The HSM 390.3cc is clearly able to withstand heavy duty use in a large office or department. With automatic features for simple operation and strong swift blades, this device offers a convenient and efficient way to dispose of all your unwanted items. We think the HSM 390.3 is an excellent central office shredder for any business.

If you’d like to purchase the HSM 390.3cc, you should really visit MyBinding.com. They have this product available at a great price and they also have a wide selection of other Paper Shredders. Plus, you’ll get free shipping on all orders over $ 75.00.Check it out for yourself now!

HSM 411.2 Level 2 Strip Cut Professional Paper Shredder Review

HSM 411.2 Level 2 Strip Cut Professional Paper Shredder Review

Large departments can really benefit from a central shredder, which is often more cost effective than several smaller devices spread around. But for that many people, you need a robust machine. The HSM 411.2 is an ideal system for use by an entire office floor. With a powerful motor, strong blades, and automatic control, this device easily handles rigorous, heavy duty shredding. Here is a more detailed look at the HSM 411.2 Strip Cut Shredder.

Strengths:

Convenience comes primarily from the many automatic features. The device has a keypad control for continuous operation and reverse. When not in use, the motor sits in standby, as indicated by an LED. Electronic control starts and stops the blades automatically as items are inserted for instant shredding when you need it. If paper gets jammed, the auto reverse feeds the clogged items back out to the user for quick clearing of the blades.
The engine is specifically adjusted for high performance and continuous use. Thermal protection prevents overheating. The closed-gear transmission keeps dirt out, slowing down wear and tear. Together, these features prolong the life of your machine.
A wide 15.8 inch opening takes in up to 53 sheets at once, including fasteners, credit cards, CDs, and even floppy disks. Items are devoured as fast as 24 feet per minute. With information being stored in so many formats, it’s nice to be able to destroy them all with one machine.
Unreadable slices float down into a massive 38.5 gallon reusable shred bag. The bin uses a pull-out system for simple removal and replacement. When the container is full or the door is open, an automatic safety feature kicks in to shut-off the blades until the items are back in place.
An impressive 20 year warranty comes on the cutting shafts. The rest of the shredder has a two year warranty on parts and labor.

Weaknesses:

While level two security is fine for generic office shredding of old memos and work orders, it doesn’t secure confidential information. For that, you will want a higher security cross cutting device. This same shredder is available in a level three cross cut model, the 411.2cc
When empty, this machine weighs about 154 pounds, definitely too heavy to move easily. However, casters on the bottom allow it to be rolled around if needed. Most users don’t find this to be much of a problem.
Shredding 53 sheets at 24 feet per minute is a nice, high capacity. But this is more than many offices need. Before you invest in such a large device, be sure you really need this much shredder. Smaller to medium offices could get the 390.3 and have it work equally as well.

HSM has produced another quality shredder with the 411.2 Strip Cut. With automatic features for simple operation and solid steel blades for swift shredding, this machine is both convenient and efficient. It would work well as a central multimedia device for use by 20-25 people. We highly recommend the HSM 411.2 Strip Cut for any department needing a low security, heavy duty central shredder.

If you’d like to purchase the HSM 411.2, you should really visit MyBinding.com. They have this product available at a great price and they also have a wide selection of other Paper Shredders. Plus, you’ll get free shipping on all orders over $ 75.00.Check it out for yourself now!

HSM 386.2 Level 2 Strip Cut Professional Office Paper Shredder Review

HSM 386.2 Level 2 Strip Cut Professional Office Paper Shredder Review

Many large departments use a central shredder, often next to a copier or other shared device. An excellent system for this purpose is the HSM 386.2 Strip Cut Professional Shredder. This model is designed to withstand the heavy shredding needs of an entire office floor. Here is a closer look at the strengths and weaknesses of the 386.2.

Strengths:

Other than an on/off switch, use of this device is completely automated. The motor sits in standby without consuming energy while not in use. A photo sensor starts and stops the blades as needed when items are inserted for on demand shredding. If a jam happens, the cutting shafts stop and then reverse overfed paper back out to the user. The auto stop also kicks in when the shred bag is full or if the cabinet door is left open. An LED display panel keeps the user constantly aware of the machine’s operational status.
A powerful, specially adjusted motor provides long periods of use and high performance. Thermal protection keeps the continuous duty motor from overheating, even during extended shredding. The time-tested closed-tooth wheel drive system keeps dirt out, delaying wear and increasing service life. An enclosed housing keeps your office cleaner by preventing the spreading of dust. It also reduces the motor noise to 60 decibels, about equal to an average conversation happening nearby.
The extra wide 15.2 inch feed takes in up to 20 sheets at once, including staples, paperclips, and credit cards. The blades rapidly slice items as fast as 24 feet per minute. Unreadable strips only 1/8″ wide remain, offering a level two security rating perfect for generic office shredding.
Narrow slices are deposited into a voluminous 31 gallon reusable waste bag. The bag sits in a convenient pull-out system that aids with removal.
HSM provides an impressive 20 year warranty on the cutting shafts with two year coverage on parts and labor.

Weaknesses:

Since this device weighs about 77 pounds, it will be pretty heavy to move around. Thankfully there are casters on the bottom for easier mobility. This doesn’t seem to be a big problem for most users.
The strips created only provide a low level two security. While this is adequate for all-purpose office shredding, any confidential material should be put through a higher security, cross cut device. This shredder also comes in a medium security, level three version.
One nice feature would be the ability to shred CDs and floppy disks. This may or may not be an issue for your office. If you’re looking for a machine that can shred these items as well as paper, we suggest the next model up, the HSM 390.3.

The HSM 386.2 is perfect for high volume performance in a large company. It’s especially beneficial to EDP departments with its continuous shredding of forms and computer print-outs. Simple operation and automated functions add to the convenience this shredder offers. A powerful motor drives steel blades to swiftly slice papers for efficient disposal of all your unwanted items. We would highly recommend the 386.2 Professional Shredder for your next departmental device.

If you’d like to purchase the HSM 386.2, you should really visit MyBinding.com. They have this product available at a great price and they also have a wide selection of other Paper Shredders. Plus, you’ll get free shipping on all orders over $ 75.00.Check it out for yourself now!

Professional Cleveland CG2

Professional Cleveland CG2

The new CG2 irons were specifically designed for the low to mid handicapper searching for a club that offers the forgiveness of a cavity back and the workability of a blade. Made from the evolutionary CMM metal composition, CG2 irons have an incredibly soft and responsive feel at impact. Because of the 25-30 grams of design freedom created by the CMM, the CG2 irons offer a lower and deeper center of gravity than most «better player» clubs which helps to get the ball in the air easier and quicker in the long irons while maintaining a penetrating ball flight in the mid to short irons.

 

The biggest technology in the Cleveland CG2‘s has to be Cleveland’s new CMM metal. CMM metal is one of the softest metals out there and it provides great feel. I won’t get into the in’s and out’s of CMM but basically it’s less dense than traditional steel and it dampens out some of the vibrations created when the golfer hits a ball. The CG2 is a pretty nice looking club and Cleveland has done a nice job combining a blade and a cavity back. The top line and sole are thin, the cavity is there but it’s not huge, the offset is minimal and the finish is appealing. 99.99% of the Cleveland CG2‘s I sell are steel… there is a graphite option but I don’t know why someone would want to dampen any feel with graphite here. The stock shafts available are great… the ever-steady Dynamic Gold steel and the Grafalloy Blue graphite. Cleveland also has a great custom department and the CG2 Iron has a lot of other shaft options.

 

What makes the CG2 better? Simply put, Cleveland developed a material that damps vibration in an unprecedented fashion and can be readily manipulated and engineered for performance. It’s called Carbon Metal Matrix (CMM). This new material, while not a composite, is infused with 17 times more carbon than traditional 8620 and 1020 carbon steels. Using a process unique to CMM, the carbon is infused into microscopic spheres suspended within the molecular structure — creating a matrix that is 10% less dense and 15% softer than traditional carbon steel. These density relieving spheres within CMM dramatically damp vibration, offering a pure, soft feel never before achieved in any golf club.

 

 

http://www.golfsetstore.com/goods-344-Cleveland+CG2+Iron+Set.html